Striker JQ0960 track jaw crushing plant

TRACK PLANT FEATURES

Vibrating Grizzly Feeder – Feeding the materials into the Jaw Crusher and / or fines chute is a vibrating grizzly feeder including:-

Vibrating Unit – Twin shaft exciter is mounted under the rear of the vibrating feeder. They are driven by a single hydraulic motor and produce a forward linear motion.

Pan – The feeder floor is fitted with Hardox 400 bolted replaceable wear liners. These extend the quality and life of the feeder.

Grizzly Section – The grizzly section is a double step grizzly that is easily removed.

Feed Hopper – The feed hopper is manufactured from Hardox 400.

Track Frame – Is manufactured from heavy-duty frame steel with 3m longitudinal centres along with 400 wide tracks as a standard with an overall track width of 2.5m.

Forward Product Conveyor – The forward product conveyor or main conveyor is 900mm wide, troughed belt conveyor with a fixed tail section and discharge height of 2.6m high. The belt is driven via a hydraulic drive motor.

Side Discharge Conveyor – The side discharge dirt conveyor is hydraulic folding, 500mm wide giving a discharge height of approximately 1.7m to the top of the head drum. The belt is driven via a hydraulic drive motor.

Fines Transfer Chute – Fitted beneath the vibrating grizzly is the fines transfer chute. This chute transfers the material passing the grizzly bar setting onto either the forward product conveyor or the side discharge conveyor.

Magnet – A magnetic cross-belt separator is suspended over the on-plant product conveyor and is complete with permanent magnet and a hydraulic drive (optional).

Powerpack – CATERPILLAR model C6.6 engine with electronic governing and emission control powers the plant. Rated at 225 bHP (165 kW) designed to drive the jaw via a hydraulic hydrostatic power take off.

Jaw Crusher – The 900 x 600mm single toggle Striker J series jaw crusher provides the latest technology in Heavy Duty Crusher design that delivers high production, large feed opening, bolted mainframe and a cast swing jaw holder. The crusher is designed to handle hard rock, ores and demolition concrete for the quarrying industries. Designed to compliment track installations, these rugged machines are manufactured with heavy duty parts for optimum operation and long life. The crusher jaw setting is adjustable from 40 – 175mm.

Crushing Chamber – The jaws are a corrugated manganese jaw which are reversible, top to bottom. The swing jaw is a fully enclosed section of cast steel construction. Both the fixed and moving jaws are retained with a wedge locking system. The main frame and swing jaw holder are protected from wear due to the unique design of the jaw faces that completely protect the inlet and outlet points of the crushing chamber.

Options – Special features are available depending on the client’s requirements.