Striker JM1310E track mobile jaw crushing plant

TRACK PLANT FEATURES

Vibrating Grizzly Feeder – Feeding the materials into the Jaw Crusher and/or fines chute is a vibrating grizzly feeder including :

Vibrating Unit – Twin shaft exciter unit mounted under the rear of the vibrating feeder. The exciter is driven by a single hydraulic motor and produces a forward linear motion.

Pan – The feeder floor is fitted with Hardox 400 bolted replaceable wear liners. These extend the quality and life of the feeder.

Grizzly Section – The grizzly section is a double step grizzly that is easily removed, optional under grizzly secondary mesh avaliable.

Feed Hopper – The feed hopper is manufactured from Mild Steel and is fitted with bolt in Hardox 400 liners. To raise and lower the wings, hydraulic cylinders are used to bring the travelling height down to a minimum and allow for maintenance to the vibrating feeder.

Track Frame – Manufactured from heavy-duty frame steel with 4.2m longitudinal centres along with 500 wide tracks as standard with an overall track width of 3.5m.

Forward Product Conveyor – The forward product conveyor or main conveyor is a 1500mm wide, troughed belt conveyor with a fixed tail section and a discharge height of 3.6m high. The belt is driven via dual electric gear motors drive motors.

Side Discharge Conveyor – The side discharge dirt conveyor is hydraulic folding, 600mm wide giving a discharge height of approximately 2.4m to the top of the head drum. The belt is driven via a hydraulic drive motor (optional).

Fines Transfer Chute – Fitted beneath the vibrating grizzly is the fines transfer chute. This chute transfers the material passing the grizzly bar setting onto either the forward product conveyor or the side discharge conveyor.

Magnet – A magnetic cross-belt separator is suspended over the on-plant product conveyor and is complete with permanent magnet and a hydraulic drive (optional).

Powerpack – CATERPILLAR model C4.4 engine with electronic governing and emission control powers the plant.

Controls – Mounted in lockable enclosures fitted with heavy duty hinges. Containing incoming isolator switch with lock out facility for plant maintenance, Control circuit transformer, Plant PLC, switches, relays, contactors and other plant function switchgear.

Jaw Crusher – The Jaw Crusher provides the latest technology in Heavy Duty Crusher design that delivers high production, large feed opening, bolted mainframe and a cast swing jaw holder. The crusher is designed to handle hard rock, ores and demolition concrete for the quarrying and mining industries. Designed to compliment Track installations, these rugged machines are manufactured with heavy-duty parts for optimum operation and long life.

Extra Heavy Duty Body – The Jaw Crusher body is a four piece, fully bolted and doweled heavy duty structure. Both the front and rear frames are cast high strength steel with side plates produced from high strength structural plate.

Crushing Chamber – The jaws are a corrugated manganese jaw which are reversible, top to bottom. The swing jaw is a fully enclosed section of cast steel construction. Both the fixed and moving jaws are retained with a wedge locking system.

Options – Special features are available depending on the client’s requirements.