jaw crusher specification and prize in pakistan

The jaw crusher is one of the most widely used crushing equipment in the mining and quarrying industry. It is available in a variety of sizes and specifications to meet the different needs of customers. The jaw crusher specification and prize in Pakistan can vary depending on the manufacturer and model. Here, we will take a look at some of the most popular models of jaw crushers available in Pakistan and their prices.

What is a jaw crusher?

A jaw crusher is a type of crushing equipment that is widely used in the mining and construction industries. The jaw crusher is designed to crush materials with a compressive strength of up to 320 MPa. The jaw crusher is mainly used for primary crushing in the mining and construction industries.

The working principle of the jaw crusher is that when the material to be crushed is fed into the upper part of the jaws, through the action of gravity, it falls into the lower part of the jaws, where it is crushed by compression between two plates, one fixed and one moving. The moving plate also provides a shearing action on the material as it moves towards the discharge point.

Jaw crushers are typically used for primary crushing, which means that they are responsible for breaking down large pieces of rock into smaller, more manageable pieces. Jaw crushers are very powerful machines and can crush rocks with ease.

How does a jaw crusher work?

A jaw crusher is a machine that uses two steel plates to crush rock. There are two types of jaw crushers: one for primary crushing and one for secondary crushing. The primary jaw crusher is used to reduce the size of the rock, while the secondary jaw crusher further reduces the size of the rock into smaller pieces.

How does a jaw crusher work? The motor drives the belt and pulley to make the movable jaw move back and forth, up and down through the eccentric shaft. When the movable jaw pushes the material towards the fixed jaw, it crushes it between them. Then, when the movable jaw goes back, Wires brush off any loose material on top of crushed rock so that it can be fed smoothly into secondary crushing stage.

What are the specifications of a jaw crusher?

The specifications of a jaw crusher are governed by the size of the feed opening and the dimensions of the crushing chamber. The width of the feed opening is determined by the gape and the height of the feed opening is determined by the throw. The throw is calculated as follows:

The jaw crusher specification typically governs the gape and maximum feed size. These dimensions vary according to manufacturer, but are approximately 16” x 24” for a LabTech Essa model JC1000 50mm x 860mm jaw crusher.

Thefeed opening widthto depthratio (F/D) of a jaw crusher can be 6:1, 8:1, 10:1 or even 20:1. This ratio represents eitherthe top sizeof themouthat its widestor thenarrowest setting that will just barely allow crushed ore through without choking.

What is the prize of a jaw crusher in Pakistan?

The prize of a jaw crusher in Pakistan varies depending on the manufacturer and model of the crusher. Some popular models include the XA400S, XR400S, and X400S from Powerscreen; the Premiertrak 400X from Terex; and the Metrotrak from . The average price for a jaw crusher in Pakistan is around 2 million Pakistani rupees (PRs).

What are the benefits of using a Jaw Crusher?

A jaw crusher is one of the main types of primary crushers in a mine or ore processing plant. The size of a jaw crusher is designated by the rectangular or square opening at the top of the jaws (feed opening). For instance, a 24 x 36 jaw crusher has a opening of 24″ by 36″, a 56 x 56 jaw crusher has a opening of 56″ square. Primary jaw crushers are typically of the square opening design, and secondary jaw crushers are of the rectangular opening design.

However, there are many exceptions to this general rule. A Jaw Crusher reduces large size rocks or ore by placing the rock into compression. A fixed jaw, mounted in a “V” alignment is the stationary breaking surface, while the movable jaw exerts force on the rock by forcing it against the stationary plate. The space at bottom of the “V”, aligned jaw plate, is the crusher product size gap, or the size of the crushed product from the jaw crusher.

The rock remains in the jaws until it is small enough to pass through gape and discharge gap at continuously variable speed controlled by load on Jaw Crusher which vary according open and closed side setting operation.

What are the types of Jaw Crushers?

There are two main types of jaw crushers: single toggle and double toggle.Single toggle jaw crushers have one jaw fixed while the other is moving. This gives them a mechanical advantage over double toggle jaw crushers.Double toggle jaw crushers have two jaws, one fixed and one moving. They give a mechanical advantage over single toggle jaw crushers because they can generate a higher crushing force with the same power input.

What are the applications of a Jaw Crusher?

Jaw crushers are used in a wide variety of applications, including construction and demolition recycling, quarrying and mining, asphalt production, and aggregate crushing.

Construction and demolition recycling: Jaw crushers are often used as primary crushers for material from buildings and other structures that will be recycled. The jaw crusher can crush the material to the desired size and then discharge it onto a conveyor belt for further processing.

Quarrying and mining: Jaw crushers are commonly used in quarrying operations as primary crushers for crushing rock. The jaw crusher can crush the material to the desired size and then discharge it onto a conveyor belt for further processing.

Asphalt production: Jaw crushers can be used to crush asphalt rocks to the desired size prior to mixing with other materials in an asphalt plant. This helps to ensure that the finished product has a uniform consistency.

Aggregate crushing: Jaw crushers are often used as primary crushers for producing aggregate (crushed stone, sand, and gravel). The jaw crusher can crush the material to the desired size and then discharge it onto a conveyor belt for further processing.

Conclusion

Despite the fact that jaw crushers are one of the most widely used crushing equipment in Pakistan, they are not without their drawbacks. One of the main problems with using jaw crushers is that they tend to produce a lot of dust and noise, which can be a nuisance for both workers and nearby residents. Additionally, because jaw crushers tend to be heavy and bulky, they can be difficult to transport from one job site to another. However, if you need a reliable and powerful crushing machine for your business, a jaw crusher may be the right choice for you.